The first two numbers in the model name of Waterloo TRX Drawer Chests stand for their width while the last two indicates the number of drawers they have. Thus, the TRX4111 is 41 inches wide with 11 drawers. It is 17.8 inches deep and 19.8 inches tall.

Strength and stability of the drawer chest is guaranteed with its sidewall-post construction. [...]]]>

The first two numbers in the model name of Waterloo TRX Drawer Chests stand for their width while the last two indicates the number of drawers they have. Thus, the TRX4111 is 41 inches wide with 11 drawers. It is 17.8 inches deep and 19.8 inches tall.

Strength and stability of the drawer chest is guaranteed with its sidewall-post construction. At the same time, this also helps in reducing its weight. In addition to this, a chest stiffener embossed with “Waterloo” installed underneath the top cover and an angled cover design both help in providing additional rigidity. With all these support, the TRX4111 can easily handle large and heavy loads.

The 11 drawers of the TRX4111 are of varying dimensions. All are equipped with ball-bearing slides that fully extend throughout their lengths. These provide complete access to the full length of the drawers, as well as easy pull out. Securing the drawers from accidental opening is Waterloo’s Posi-Latch™ System which firmly fastens them. Liners are provided to help protect the inside surfaces of the drawers from unnecessary scratches. At the same time, they also protect your more sensitive tools and equipment from the hard surface of the steel drawers.

On both sides of the drawer chest are positive-stop chromed handles for lifting or moving while at the front is a keyed locking mechanism that secures all drawers. Also at the front are polished drawer trims that enhance the TRX4111’s appearance.

The Cooper Garage Maximum Storage Series 12 consists of three cabinets, each with two adjustable and one fixed shelves. They measure 6 feet high and 4 feet wide. For the depth, you have an option of either 16 or 22 inches. The Series 12 means that you have a total of 12 running feet of cabinets.

The cabinets of the Series [...]]]>

The Cooper Garage Maximum Storage Series 12 consists of three cabinets, each with two adjustable and one fixed shelves. They measure 6 feet high and 4 feet wide. For the depth, you have an option of either 16 or 22 inches. The Series 12 means that you have a total of 12 running feet of cabinets.

The cabinets of the Series 12 do not stand on the garage floor. Instead, they are suspended from a wall by a weight-focused Steel Rail Support System™ that directs the weight of the cabinet against the wall. This type of installation keeps them dry as they do not come into contact with moisture coming from the floor. Cleaning the area below them is also facilitated.

The cabinets are made of ¾-inch thermofused low-pressure laminates in an open-back construction. This design is intended to control insects and mold that usually infest the cool dark space between the back wall of a cabinet and the wall of the house. Further, this also allows the installation of the cabinet in areas where certain devices are already installed such as a thermostat or sprinkler controls.

The front of the shelves inside the cabinet are protected with C-bar aluminum extrusions. These also help prevent stored objects from sliding out accidentally. Front and rear supports prop the shelves when fully loaded. Each cabinet can hold up to 300 pounds.

While the inside of the cabinets are in all white, you have two choices for the exterior finish –maple wood grain or folkstone gray. Regardless of your choice, you are assured of a fine-looking, functional, and practical storage solution for your stuff.

Quantum cabinets are heavy-duty storage systems constructed of gauge 14 steel sheets that are full welded to each other. This method of joining prevents twisting and bending of the steel even under heavy loads. The baked-enamel coating of the cabinets keeps rust and corrosion away thus ensuring years of service. This enamel could either be gray or beige.

Security of the [...]]]>

Quantum cabinets are heavy-duty storage systems constructed of gauge 14 steel sheets that are full welded to each other. This method of joining prevents twisting and bending of the steel even under heavy loads. The baked-enamel coating of the cabinets keeps rust and corrosion away thus ensuring years of service. This enamel could either be gray or beige.

Security of the cabinet is provided with a three-point locking system, one each at the top, middle, and bottom of the cabinet’s left door. This is opened and locked with a locking handle. Two keys are supplied with the cabinet.

In the interior of the cabinet are two adjustable shelves, while on each door are three smaller shelves which are also adjustable. The shelves in the QSC 4804 model can be set sufficiently close to each other to make room for the 64 bins sized 7.6 cm in height, 10.25 cm in width, and 18.7 cm in depth; and the 20 bins measuring 17.8 cm high, 21 cm wide, and 37 cm deep.

The placement of the shelves and bins is entirely up to you. The bigger shelves and bins are attached to the back wall of the cabinet while the smaller ones are fixed to the back of the doors. You can have the shelves at the upper or lower portion of the cabinet depending only on your need or taste.

The bins are made of polypropylene, a tough thermoplastic polymer that is highly resistant to acids, bases, and chemical solvents. They have a hopper in front for easy access, and a label holder for identification of contents. There are six available bin colors –blue, green, yellow, ivory, red, and black. You cannot, however, order multiple colors with the cabinet.

Combining good looks, functional design, and durable materials, this two-door cabinet from Ultimate Garage beats plenty of its competition hands down.

This Ultimate Garage cabinet is designed with radius corners, edges, as well as door profiles. Zinc handles provide a beautiful contrast to the gray of the two doors with their extruded brushed chrome finish. These are ergonomically designed and [...]]]>

Combining good looks, functional design, and durable materials, this two-door cabinet from Ultimate Garage beats plenty of its competition hands down.

This Ultimate Garage cabinet is designed with radius corners, edges, as well as door profiles. Zinc handles provide a beautiful contrast to the gray of the two doors with their extruded brushed chrome finish. These are ergonomically designed and are oversized to 20 mm to assure a good and comfortable grip when opening the cabinet.

Tools, ropes, wires, cans of paints or oil, and an olio of carpentry materials as nails and screws can all be stored in the three shelves the cabinet. Two of these shelves are adjustable allowing the storage of bulky items. Each of them can carry a load of up to 45 kg. Each door pivots on four European hinges guaranteeing that the doors will not sag even after prolonged use. The cabinet stands on four Aluminum feet that are adjustable to adapt to uneven floors. They also elevate the cabinet four inches from the garage floor.

The Ultimate Garage Cabinet is made of 19 mm multi-density particle board or MDF. This MDF is thermofused with a PVC textured laminate which greatly enhances the durability, stability, and strength of the fiberboards. Polyurethane coatings are applied to the cabinet doors. These coats protect the doors from stains and superficial abrasions giving them a neat and clean look.

As for its dimensions, the cabinet is 203 cm high, 90 cm wide, and 53 cm deep.

Among outdoors adventurers Coleman is known more for their camping and other outdoor gear. The company, however, also produces a line of products for the home, among them, garage storage equipment.

Coleman’s garage storage solution is actually a modular system that can be purchased piece by piece depending on your storage needs and, of course, budget. A good piece of this [...]]]>

Among outdoors adventurers Coleman is known more for their camping and other outdoor gear. The company, however, also produces a line of products for the home, among them, garage storage equipment.

Coleman’s garage storage solution is actually a modular system that can be purchased piece by piece depending on your storage needs and, of course, budget. A good piece of this module to start building the complete set is the two-door base cabinet.

This cabinet has a width of 79 cm and a height of 85.4 cm, standing on moisture resistant feet that can be adjusted to even out jagged floors. It is approximately 50 cm in depth.

It is made of wood composite and is finished in silver with the doors shaded a little darker than the sides. This finish is a 100 % resin-based laminate from Sauder Woodworking. Known as the WorkShield™, it resists stains even from ethyl alcohol, distilled water, ammonia, vegetable oil, citric acid, coffee, tea, mustard or ketchup.

The top is covered with a rubber work surface thus protecting the wood from abrasions. Two handle grips are installed on each of the two doors. These are also made of rubber providing a good grip even when your hands are wet or oily.

With the two-tone silver finish, the black rubber top and handle grips, the Coleman Two-Door Base Cabinet looks attractive, and is certainly a great addition to any garage. It can also hold a good number of your tools and equipment in its two shelves, one of which is adjustable or removable. Each of them has a weight capacity of about 25 kgs.

Small and even medium-sized garages often involve the problem of where to put a workbench where you can work when installing a car alarm system or cutting wood planks for your child’s tree house. You would not want to do these things on your study desk or kitchen work table. But if the space in your garage is limited, you [...]]]>

Small and even medium-sized garages often involve the problem of where to put a workbench where you can work when installing a car alarm system or cutting wood planks for your child’s tree house. You would not want to do these things on your study desk or kitchen work table. But if the space in your garage is limited, you will need a FoldAWay Workbench.

The FoldAWay Workbench is not just a table top that can be folded down resting against the wall. Instead, it doubles as a wall-mounted storage cabinet when not in use as a workbench.

The cabinet measures 52 inches wide, 25 inches high, and 21 inches deep. The bottom of the front panel is fixed to the front of the base. Together, these swivel on hinges connecting them to the bottom of the rear panel. Thus, when fully opened, the inside of the front panel becomes the workbench top. This is a 2 x 4 feet surface giving you enough space for your work.

For heavy work, you can use the detachable legs. With these you can clamp an electric grinder or vise on the table. You do not even need to remove them when you are through working. For lighter work, they are not necessary.

The inside of the cabinet is lined with pegboards. With these you can install hooks where you can hang your tools. For those that cannot be hanged, you can also mount shelves. There are four gas shocks hidden behind the pegboards with a force of almost 800 pounds that help in closing the cabinet.

The FoldAWay Workbench is made of gauge 18 steel. It is power coated to keep it looking clean and shiny and, perhaps more importantly, to resist rust and corrosion.

The Edsal Storage Rack Starter Unit is an open shelving storage system with three shelves. The unit measures 6 feet tall, 2 feet deep, and also 6 feet wide.

The frame of the Storage Rack Starter Unit is made of gauge 16 steel that has been chemically treated to enhance its rust-resistance. The stands of the rack are supported not [...]]]>

The Edsal Storage Rack Starter Unit is an open shelving storage system with three shelves. The unit measures 6 feet tall, 2 feet deep, and also 6 feet wide.

The frame of the Storage Rack Starter Unit is made of gauge 16 steel that has been chemically treated to enhance its rust-resistance. The stands of the rack are supported not only by the steel rails on which the shelves rest, but are also reinforced by diagonal and horizontal bars. It is coated in a shiny gray paint.

The shelves or decks are made of particleboards of sawdust and wood fragments bonded by strong resin binders. These are adjustable in three-inch increments by simply inserting the rails into pre-punched holes on the stands. Each of these shelves has a carrying capacity of up to 1,500 pounds.

This heavy-duty storage rack is easily assembled without need of tools. This can be done in a few minutes, after which you can start loading up your stuff onto the shelves. It is also easily expandable in the event that your collection of tools and equipment continue to increase. You can purchase additional rail posts and shelves and use the stands of the existing rack as common posts.

Kobalt stainless steel tool cabinets come in different sizes and numbers of drawers, but if you are a carpentry or auto mechanic buff you may need this rather large cabinet for your numerous tools.

These cabinets are built with double walls, both in stainless to assure you of its resistance to rust and longevity. Its 11 drawers are of varying [...]]]>

Kobalt stainless steel tool cabinets come in different sizes and numbers of drawers, but if you are a carpentry or auto mechanic buff you may need this rather large cabinet for your numerous tools.

These cabinets are built with double walls, both in stainless to assure you of its resistance to rust and longevity. Its 11 drawers are of varying sizes to accommodate tools or equipment of different sizes and shapes. Sliding these drawers out or into the cabinet is easy as they glide on heavy-duty ball bearing slides. In order for the tools and the drawers not to scratch and damage each other, PVC plastic liners cover the drawers. Each drawer has a weight capacity of 99 lbs. In terms of volume, all 11 drawers have a total cubic inch-capacity of 33,149.

Insofar as tools can cost hundreds of dollars per item, an internal cam lock is provided to secure them. The cabinet stands on four locking rubber casters. This means you can easily move it around to where your work is, yet expect it to be stable while standing still. It also features a four-receptacle power supply so you can power up four tools even if you have only one extension cord.

The Kobalt 41-Inch, 11-Drawer Stainless Steel Tool Cabinet is 41 inches wide, 38.5 inches tall, and 21 inches deep. At this size, you can store and organize most, if not all, of your tools and equipment and you will never have to worry about misplacing a single screwdriver or wrench again.

If your garage is already of full of your tools, equipment, or other things that cannot be stored inside your main house and you still have some more stuff coming in, don’t despair. You can always look up for an answer. It doesn’t have to be up to heaven, just up your ceiling.

Built by Racor Home Storage Products, the [...]]]>

If your garage is already of full of your tools, equipment, or other things that cannot be stored inside your main house and you still have some more stuff coming in, don’t despair. You can always look up for an answer. It doesn’t have to be up to heaven, just up your ceiling.

Built by Racor Home Storage Products, the ProStor Heavy Lift Overhead Storage is suspended from the ceiling by two strong parallel steel support beams. At the ends these beams are four pulleys, each of which supports vinyl coated steel cables attached to a 4 ft x 4 ft platform. The other ends of the cables are wound around a winding axle that is connected and is perpendicular to the two beams. A long hand crank that can be hooked to a ring on one end of the axle allows the hoisting or lowering the platform.

The ProStor Heavy Lift has a capacity of 250 lbs. You will, however, need to evenly distribute the weight of its load. It can carry file boxes, some big tools, kayaks, canoes, tires, ladders, or outdoor furniture. Since the platform lowers eight feet from the support beams, the ProStor can be installed on a ceiling of up to 12 feet. This means that the platform would be at its lowest level at four feet, a height at which loading is still convenient. If this gets any higher, loading your things, especially the heavier ones, could be difficult.

This extra large cabinet features two swing doors made of diamond or checker plates that are finished with silver. The cabinet casing is of a hammered granite finish. Both these finishes are applied to the bare metal through a process called powdercoating. This is a procedure that harnesses static electricity to effectively bond and gel the protective coating with the [...]]]>

This extra large cabinet features two swing doors made of diamond or checker plates that are finished with silver. The cabinet casing is of a hammered granite finish. Both these finishes are applied to the bare metal through a process called powdercoating. This is a procedure that harnesses static electricity to effectively bond and gel the protective coating with the gauge 21 steel of the Gladiator Extra Large GearBox. The end result is a highly corrosion-resistant garage cabinet.

The Gladiator Extra Large GearBox is six feet tall, four feet wide, and one and a half feet deep. With this size, it can take in plenty of your automotive and carpentry manual and power tools, bottles and cans of paint, engine and gear oil, car wax, aerosol sprays, or brake and power steering fluids. There are three full-width shelves inside the cabinet, one of which is fixed while the other two are adjustable. Each shelf has a weight capacity of approximately 50 pounds.

The heavy-duty 5/16-inch steel panels of the GearBox are bolted together with Allen head screws that are guaranteed to hold the panels even after years of use. A heavy-duty latch that is operated with a rounded pin locks the doors keeping your things inside secure. Recessed handles serve as the door opener.

You have two mounting options for the Gladiator Extra Large GearBox. You can have it standing on your floor or hanging from a wall. If you opt for the former, you can use the leveler legs that are standard equipment for the GearBox to correct any listing or tilting. Hanging it from a wall to free floor space can be done through the use of Gladiator’s Wall Bracket Kit. This bracket guarantees a secure attachment to any sturdy wall in your garage.