Constructed out of heavy-gauge steel, the Jobox 678990 Super-Duty Rolling Work Bench is a strong and sturdy storage equipment for your power and hand tools. It is painted with a brown coat to protect the steel from rust and corrosion. Although called a workbench, it also provides a large space for storing your hand and power tools.

The top of [...]]]>

Constructed out of heavy-gauge steel, the Jobox 678990 Super-Duty Rolling Work Bench is a strong and sturdy storage equipment for your power and hand tools. It is painted with a brown coat to protect the steel from rust and corrosion. Although called a workbench, it also provides a large space for storing your hand and power tools.

The top of the Jobox workbench is made of 12 gauge steel making it a firm and solid surface to work on. As if that is not enough, it is provided with reinforcements making it even stronger.

The workbench has two doors that cover its entire front. These are made of 16 gauge steel, and are hinged to the main body by 14 gauge 3/8-inch steel hinges. These are staked and welded for a solid and firm attachment. Behind each door are two shelves, complete with railings to keep items stored on them from falling. The shelves are 3 inches and can hold small cans and bottles.

Six drawers and one shelf are installed inside the workbench. These are made of 18 gauge steel and are strong enough to support weights of up to 125 pounds each. They run on heavy-duty ball bearing slides for ease of opening and closing even when they are fully loaded. Sizes of the drawers differ –three are 2½ inches deep, two are 4 inches, and one is 5½ inches. Your screwdrivers, pliers, wrenches, hammers, saws, and other small hand tools can be kept in the shallower drawers, while nail guns and power drills can be accommodated in the 5½-inch drawer.

The Jobox 678990 Super-Duty Rolling Work Bench stands on four 6-inch casters that allow its easy movement from one work area to another. Two of the casters swivel for easy maneuvering while the other two are lockable to prevent it from rolling away while you are working.

Dimensions of the workbench are approximately 50″ W x 41″ D x 27″ H.

Supported by sturdy steel posts and beams, the Stack-On 318544 Steel Workbench with Pegboard Back Wall provides a stable and secure work area in your garage or workroom.

The posts of the workbench are crafted from square channel beams thus assuring you of extra load-bearing strength. On both sides, steel pegboards are included in between the posts for hanging of [...]]]>

Supported by sturdy steel posts and beams, the Stack-On 318544 Steel Workbench with Pegboard Back Wall provides a stable and secure work area in your garage or workroom.

The posts of the workbench are crafted from square channel beams thus assuring you of extra load-bearing strength. On both sides, steel pegboards are included in between the posts for hanging of small tools. Steel horizontal beams welded atop the posts provide additional support to the worktop.

The worktop is made of a one-inch thick piece of wood that is fastened to the steel beams securely keeping it in place. Immediately below it is a steel drawer that runs on ball bearing slides for ease of opening or closing even when loaded. It does not run the entire width of the workbench, but it can be installed either on the left or right side.

Below the worktop are two shelves where you can keep your portable toolboxes, boxed power tools, hardware items, or cans of paints, oils, or other chemicals. These are made of steel so they are strong enough to take on heavy loads. Measuring 17 inches deep and 38 inches wide, they can accommodate plenty of your equipment and materials.

At the rear of the worktop is another pegboard for hanging the hand tools you most frequently use, such as screwdrivers, wrenches, or pliers. It is framed with steel and topped with a steel shelf for storing small items. To keep stored items from falling off, it is surrounded by rails.

All steel components of the Stack-On 318544 Steel Workbench with Pegboard Back Wall, except the drawer, are finished in epoxy paint colored gloss black, thus guaranteeing superior resistance to rust or corrosion.

Overall dimensions are 40″ W x 20″ D x 58″ H. The worktop is at 36 inches high.

http://www.globalindustrial.com/p/work-benches/systems/fix-height-workbenches/stack-on-174-steel-workbench-with-pegboard-back-wall?utm_source=nextag&utm_medium=shp&utm_campaign=Fixed-Height-Workbenches-nextag&utm_term=318544&infoParam.campaignId=WI

http://www.garagecabinetsonline.com/Stack-On-WB-382-All-Steel-Compact-Workbench.html

Crafted with a metal frame and wood tabletop and shelves, the Harbor Freight Tools 99681 Multipurpose Workbench is a medium-duty workbench suitable for most home garage tasks.

The workbench stands on legs of angle bars with rubber feet to prevent them from scratching your floors. They are fastened with metal screws to sets of beams that support the tabletop and [...]]]>

Crafted with a metal frame and wood tabletop and shelves, the Harbor Freight Tools 99681 Multipurpose Workbench is a medium-duty workbench suitable for most home garage tasks.

The workbench stands on legs of angle bars with rubber feet to prevent them from scratching your floors. They are fastened with metal screws to sets of beams that support the tabletop and the bottom shelf. Immediately below the top are two drawers with chrome handles. The rear legs do not stop at the tabletop, but instead extend further upwards. At their top is another shelf for additional storage. This shelf is shallower than the one at the bottom and can only support light items.

Below the upper shelf is a portable 120-volt, 14-watt cabinet light for better visibility while working. Fastened to the posts supporting the upper shelf and the light is a pegboard. It spans the entire width of the workbench and the space between the tabletop and the upper shelf.

At the left side of the Harbor Freight Tools 99681 Multipurpose Bench is a portable power strip. It is a 125-volt, 15 amp, 1,875-watt strip with three 3-pronged grounded outlets. A power cord that is over 6 feet allows you to move or install your workbench at a distance from your wall power outlet. The mounted power strip is useful when you need to work with your electric power tools.

The tabletop is 34 inches from the floor making it comfortable to work on whether standing or sitting on a stool. It is approximately 47 inches wide and 23 inches deep giving you plenty of room to work. Its load capacity is 220 pounds. The drawers below measure about 20 inches wide and 18 deep, with a height of a little over 2 inches. The bottom shelf has the same measurements as the tabletop.

The top shelf, on the other hand, is 47 inches wide but only 9 inches deep, but it can support a load of 44 pounds. At its front end is a 3-inch barrier to prevent stored items from falling off the shelf. The pegboard is also 47 inches wide with a height of 23 inches. It can hold a number of small hand tools.

Wrapped by a band made of steel, the medium-density fiberboard or MDF tabletop of the Craftsman Model 59186 Professional Workbench is firmly seated atop the frame of the workbench, keeping it from moving even when heavy loads are pushed or dragged across its surface. It is treated with a protective coating that keeps stains out, making it easy to clean [...]]]>

Wrapped by a band made of steel, the medium-density fiberboard or MDF tabletop of the Craftsman Model 59186 Professional Workbench is firmly seated atop the frame of the workbench, keeping it from moving even when heavy loads are pushed or dragged across its surface. It is treated with a protective coating that keeps stains out, making it easy to clean and maintain. The coating even gives the board a certain amount of gloss.

The frame is made of heavy-duty steel that is finished with baked enamel. It is constructed in a manner that it can carry loads of up to 2,500 pounds. The enamel provides excellent protection from rust or corrosion. It is colored black matching the light tan of the fiberboard.

Underneath the tabletop is a steel support beam that runs its full width. This provides the necessary reinforcement for the fiberboard allowing it to be packed with heavy loads. At the rear end of the tabletop is a backstop that prevents your tools and materials from rolling and falling off the workbench.

Also below the tabletop are steel panels that are incorporated with the legs. The panels have perforations making them serve as pegboards where hooks can be inserted for hanging your hand tools. There are also shelves on the panels where small boxes or cans may be stored. Further, a small wire mesh tray hangs from the bottom of the tabletop for additional storage. Adjustable feet allow leveling of the workbench in case the floor where it is used is not even.

Overall dimensions of the Craftsman Model 59186 Professional Workbench are 96 inches in width, 24 inches in depth, and approximately 40 inches in height. It weighs 135 pounds.

Arguably, the workbench is the most abused furniture in the house. Materials for projects that require hammering and pounding, cutting and sawing, or twisting and shaping all rely on a workbench for support. Often these are dusty, dirty, grimy, and greasy. For this reason, Edsal Manufacturing Company came up with the Edsal Basic Plus Premier Adjustable Leg Workbench. It is [...]]]>

Arguably, the workbench is the most abused furniture in the house. Materials for projects that require hammering and pounding, cutting and sawing, or twisting and shaping all rely on a workbench for support. Often these are dusty, dirty, grimy, and greasy. For this reason, Edsal Manufacturing Company came up with the Edsal Basic Plus Premier Adjustable Leg Workbench. It is sturdy and it is easy to clean.

The Edsal Basic Plus is a versatile workbench. With its adjustable legs its height can be varied from 30 to 34 inches in one-inch increments, allowing you to choose either a standing or sitting position while you work. You can even choose your preferred worktop size. Widths can be 60 or 72 inches, while depths are 30 and 36 inches. You can have any combination you want.

In addition, you can also choose your preferred worktop among a butcher block maple, wood, laminated plastic, or steel. Your choice will depend on the type of work you will be doing on the workbench. For wood working, the wood tops are recommended. The laminated plastic is fine for light work on small to medium-sized appliances. Heavy work such as on car or motorcycle engines may require the steel version. All types are fitted with side and back stops to keep your materials on the work top.

The frame and the legs are constructed out of 14 gauge steel to guarantee that it is strong enough to stand up to the kind of abuse workbenches usually get. Indeed, it has a 5,000-pound weight capacity. Further strengthening the legs are a pair braces on each side. Extending from the lower leg brace on one side to the other is a metal shelf for extra storage. A rail guard is installed behind it to prevent stored items from falling off.

All metal components are powder coated with a beige dry enamel that is electrostatically applied to the metal and heat-treated. This results to an extremely cohesive coating that excludes rust and corrosion.

Workbenches are necessary equipment for do-it-yourselfers and craftsmen. Ordinary office tables won’t do as these are usually not sturdy enough to take the loads involved with manual work. Also, their work often entails dust, oil, chemicals, and other dirt. You would not want these on your study desk, much less on the dining or kitchen table.

Workbenches may be designed [...]]]>

Workbenches are necessary equipment for do-it-yourselfers and craftsmen. Ordinary office tables won’t do as these are usually not sturdy enough to take the loads involved with manual work. Also, their work often entails dust, oil, chemicals, and other dirt. You would not want these on your study desk, much less on the dining or kitchen table.

Workbenches may be designed for a specific work such as woodworking, metal working, gardening, and electronics work. Others are multi-purpose workbenches, such as the Little Giant Heavy-Duty Workbench BEM129.

The design of the BEM129 is simple. It features a large worktop with two drawers underneath and sturdy legs supporting a long shelf. The top is made of an extra-strong gauge 7 steel measuring 6 feet in width and 3 feet in depth. In spite of this thickness, about 0.18 inches or 4.5 mm, it is reinforced with steel bars to keep it from sagging under heavy loads. The edges of the top are rounded to soften their appearance and to blunt any sharp corners.

Two large drawers with measurements of 26″ W x 20″ D x 6″ H are installed below the worktop. At this size they can accommodate plenty of your hand tools and even electric as well as pneumatic tools. They run on heavy-duty rollers to make opening or closing easy even when filled to their capacity of 250 lbs. each. Padlock hasps are fitted on the left sides of the drawers allowing you to secure your tools.

The Little Giant Heavy-Duty Workbench BEM129 stands on angle steel legs with footpads. Anchor holes with a diameter of 5/8″ are drilled into the pads for securing the workbench to the floor. For added stability, gauge 7 gussets anchored to the legs are added to brace the worktop. Indeed, with this support you can load up to 10,000 lbs on the worktop.

Two horizontal angle bars reinforcing the front and rear legs also support a long open shelf for additional storage space. Here you can store cans of paint, oil, cleaning materials, and similar items with a cumulative weight of 500 lbs.

Some families have more than one automobile. They might have a car, an SUV, a motorcycle, and a bicycle. These would take up all the space in the garage leaving no room for a workbench. However, with all those vehicles, sooner or later, they’d need to make some improvements or repairs on them. This necessitates a workbench.

The only possible answer [...]]]>

Some families have more than one automobile. They might have a car, an SUV, a motorcycle, and a bicycle. These would take up all the space in the garage leaving no room for a workbench. However, with all those vehicles, sooner or later, they’d need to make some improvements or repairs on them. This necessitates a workbench.

The only possible answer to such a need is a folding table such as the E-Z UP Instant Blow Molded Garage Workbench. This offers the best of both worlds as it provides ample work area for your projects and hobbies when folded up, but is reduced to a mere seven-and-a-half inches from the wall when folded down.

The worktop consists of an injection-molded plastic that is durable and is capable of absorbing strong impacts. It measures 60 inches wide and 23 inches deep thus providing you with plenty of space for your work. It stands on a frame of tubular steel legs that are designed to be collapsed allowing it to fold down when not in use. In spite of its being collapsible, the frame provides a solid support for the worktop.

Below the worktop are two steel drawers intended for your small hand tools. They feature plastic dividers for a more organized storage, and a locking mechanism. These are necessary as the drawers assume a vertical position when the top is folded down.

A magnetic pegboard, reaching up to a height of 60 inches and running almost the whole width of the workbench, where additional tools can be suspended on supplied pegboard hooks is installed at the back of the worktop. It is powder coated in metallic gray, giving it a covering that is both attractive and protective. With this coat, rust and corrosion are effectively excluded.

At the top of the pegboard is a small shelf where you can stow aerosol cans, small paint and wax tin containers, or similar items. Underneath the shelf is a fluorescent lamp to illuminate your work and an AC outlet for your power tools.

A solid and sturdy workbench is important to any do-it-yourselfer. Indeed, he can have all the hand and power tools he wants but if he has nowhere to work, they would only be gathering dust and may eventually rust. For someone whose garage or work area is challenged for space, this may be a real problem. However, with the Bench [...]]]>

A solid and sturdy workbench is important to any do-it-yourselfer. Indeed, he can have all the hand and power tools he wants but if he has nowhere to work, they would only be gathering dust and may eventually rust. For someone whose garage or work area is challenged for space, this may be a real problem. However, with the Bench Solution QW00 Workbench with IdealWall, even tight garage spaces can have their own workbenches.

This Bench Solution model is actually a very simple solution to the problem of space. They designed a worktop that folds down when not in use. One common worry with these kinds of construction is that the supporting braces may not be sturdy enough for tough work. However, the QW00 workbench uses robust and heavy-duty supports that can sustain loads of up to 400 pounds to prop the worktop. This is more than sufficient for most home projects.

The worktop is made of solid hardwood, measuring 60″ W x 24″ D x 1.75″ H. It is sealed with a clear coating to protect it from scratches and moisture. At the same time, this coating also enhances the natural beauty and grains of the wood.

Mounted on the wall, just above the workbench is an IdealWall Solution. This is a wall panel system that has closely-spaced grooves into which pegboard hooks and L-shaped brackets can be inserted. These are then used to hang your tools and equipment. You can even install small shelves on the IdealWall for those items that cannot be hooked, such as small cans of paint or boxes of small hardware items. Most tools, however, can be easily suspended from hooks or brackets.

The workbench comes with three panels with a height of 12 inches each. Their width is 96″ but they can be cut to align with the worktop. These can be either in white or gray and they come with matching end trims.

Extending to a width of 6.5 feet with a depth of a shade over 2 feet, the Excel TSC79111 Metal Workbench offers ample space to any do-it-yourselfer working on his project or even several projects at the same time. Indeed, at this size, it is big enough for professionals. Its height of 34 inches is perfectly suited for a worker [...]]]>

Extending to a width of 6.5 feet with a depth of a shade over 2 feet, the Excel TSC79111 Metal Workbench offers ample space to any do-it-yourselfer working on his project or even several projects at the same time. Indeed, at this size, it is big enough for professionals. Its height of 34 inches is perfectly suited for a worker of average height.

Constructed solely with gauge 16 and 18 metal, the workbench is strong and durable and is capable of absorbing impacts that could come from sawing or hammering materials perched on its surface.

The entire workbench is coated with a dry enamel powder that is electrostatically applied and heat-cured. The result is that this coating becomes a virtual second-skin to the metal effectively keeping rust and corrosion at bay. The coating is smooth and non-porous and thus will not absorb oil or other chemicals. This makes the workbench resistant to stains and easy to clean.

Below the worktop are three drawers for the storage of your hand tools such as your screwdrivers, spanners, wrenches, pairs of pliers, chisels, mallets, or hammers. You may also keep your small power tools in one of the drawers. All three drawers are secured by individual locks to keep your tools safe.

A shelf near the bottom of the workbench serves the dual function of providing extra support and stability for the legs, and providing additional storage space. It can be used to hold cans of paint or oil, and containers of wax and other chemicals.

The Excel TSC79111 Metal Workbench is available only in bright red that will definitely catch the attention of anyone entering your garage.

At 60 inches wide and 24 deep, the Gorilla Rack GR2102B Workbench provides ample workspace. The worktop consists of a particle board that is sufficiently strong to support most work done in a home garage.

To the rear of the worktop is an upright pegboard that is framed in steel. Hooks or hangers can be installed on the pegboard which can [...]]]>

At 60 inches wide and 24 deep, the Gorilla Rack GR2102B Workbench provides ample workspace. The worktop consists of a particle board that is sufficiently strong to support most work done in a home garage.

To the rear of the worktop is an upright pegboard that is framed in steel. Hooks or hangers can be installed on the pegboard which can be used to hold a good number of your small tools. With the steel frame as support, the board can take some weight. Hammers, hacksaws, screwdrivers, staplers, or spanners can be hung on the pegboard.

At the top of the pegboard is an open shelf that spans the width of the workbench for more storage. You can stow small bottles or canisters of oil, cleaning chemicals, waxes, or similar items on the shelf. A metal riser surrounds it so you won’t have to worry about the bottles falling off.

Below the worktop are two metal drawers positioned alongside each other. Each has a load capacity of 100 pounds. Heavier tools that cannot be hung on the pegboard can be stored in these drawers. Perhaps you can also keep some sketches or plans of projects you intend to work on in them.

Further below is another open shelf that is as large as the worktop. This is intended for your bulkier items such your power tools, portable toolbox, or large containers of paint or engine oil.

The frame and legs are constructed of gauge 14 and 16 steel guaranteeing a solid and strong base. These are powder coated in black which gives them a nice shine and more importantly, excellent protection against rust.